Cronus Test

Filled for Category: Site Specific Fall Protection Plan version 3 (Form)
Site: Form Creator | Employer: We the Safe Inc.
Download PDF Send Email Generate QR Code for Worker Signing

Creation details

Disclaimer:
This QRsafety.com Smart Form is a series of questions that should be answered prior to working at heights. The questions may not identify every hazard for your task and location. The form is to be completed by a qualified person that can identify all hazards and add any that are missing.
This Smart Form has fields that will be hidden if they are not relevant to the work, as determined by your hazard assessment answers.
The completed Site Specific Fall Protection plan may be a part of the total solution however is not to be the only part of it. Users use it at their own risk.
Date:

2026-01-17

Creators contact info - add additional rows if needed:
No data entered

Workplace location/ contact details

Location:
No data entered
Location cont.:
No data entered
Supervisor info - add additional rows if needed:
No data entered

Work area details

What type of structure/ work area? :
N/A
What location is the work taking place (level/ side etc.)?:
N/A
What type of work (ex. window washing)?:
N/A

Hazards (basic) with standard controls

Definition Hazard:
Anything that could harm a worker or the public. Think of your work and location - what could happen to hurt workers or public
Definition Control:
Steps/ actions taken to eliminate or decrease the risk of the hazards identified above. NOTE - best practice and regulations require controls to be chosen following a hierarchy with elimination being the first.
Can a worker fall to lower surface from leading edges, roof, shafts, openings, doorways etc..?:
Selected:
Yes
Available options were:
Yes No
Is it possible to drop tools/ materials or have workers/ public enter your work area and be exposed to a fall hazard?:
Selected:
Yes
Available options were:
Yes No
Choose the controls for dropped objects and access to work area:
3 selecteds of 12 items
Tool tethers
Materials stored away from leading edge and fall hazards
Materials secured to structure
Small materials stored in buckets
Debris netting
Exclusion zones below &/or at access
Signage and locked doors (when possible) at all entry points to exclusion zone
Coordinate with Prime contractor
Spotter(s)
Hard hat tether
Mobile phone/ radio tether
Rope/ cable to secure large items
Other tool/ material controls:
N/A
Are there power lines near your work area?:
Selected:
Yes
Available options were:
Yes No
Warning LOA:
When there is potential for you to enter the limit of approach during the arresting of a fall and when there is potential for any of your tools or materials to enter the LOA - you will need an additional procedure created and followed.
Confirm Voltage and controls:
Selected:
Limit of approach will be confirmed using 30M33 documents
Available options were:
Limit of approach will be confirmed using 30M33 documents

Hazards (task Specific) with control checklist added when chosen

Is there a fall hazard during access to the work area? - example: needing to climb a roof to connect to anchor:
Selected:
Yes
Available options were:
Yes No
How will you control the fall hazard that is present while you access the work area?:
No selection made
Available options:
A procedure for 1st person up will be used Personal fall protection system will be connected to prior to access A tag line will be used to allow connection from lower surface Other
Are there floor openings that you could fall in?:
No selection made
Available options:
Yes No
Is the work surface a steep slope (8/12 +)?:
No selection made
Available options:
Yes No
Is the lower surface less than 18’ below anchor point?:
No selection made
Available options:
Yes No
Are there any other hazards?:
N/A

Hazards (ladders and work platforms) with control checklist when chosen

Are you working from a ladder?:
No selection made
Available options:
Yes No
Are you working from a mobile elevated work platform?:
No selection made
Available options:
Yes No
Are you working from a scaffold?:
No selection made
Available options:
Yes No
Are you working from a swing stage?:
No selection made
Available options:
Yes No
Are you working from a bosuns chair?:
No selection made
Available options:
Yes No
Are you using rope access?:
No selection made
Available options:
Yes No
Are there any other work platforms you are using?:
N/A

Controls - Personal Fall Protection system and administrative

Are you to able work in an area with guardrails controlling fall hazards? note - swing stage guardrails require a back up fall arrest system :
No selection made
Available options:
Yes – 100% of time including access to the work area Yes, I will also use other controls No

Equipment list and system step by step set up- will be empty when not applicable

Step by step:

Do not proceed until you have reviewed and understand the manufacturer instructions. These step by step are in addition to them.

Exclusion or Control zone items needed:
0 selecteds of 8 items
Calculation for size of drop cone
Coordination with Prime Contractor
QRsafety.com leading edge permit
Signs
Barricade tape or rope
Procedure for training spotters
Effective communication (radio/ whistle)
Flashlight
Exclusion or Control zone step by step:
0 selecteds of 7 items
Post sign at entrance to fall hazard areas – “Authorized Personnel” only or similar
Lock access door, remove access ladder or block accesses
Review this plan with anyone who enters the area that has the fall hazard
Post this plan for anyone to see
Add a sketch to this plan that shows the outline of work area, fall hazard(s), path to work area and distance to maintain between from hazard(s)
Erect a highly visible raised warning line or barriers with a minimum 6.5’ buffer zone
Confirm with anyone who uses this plan that they are not to get within 6.5’ of any leading edge unless using personal fall protection

Photos - add photos that will help users understand the hazards and controls

Do you want to add any photos:
No selection made
Available options:
Yes No

Drawings - add any that will help users understand the hazards and controls

Do you want to upload any files:
No selection made
Available options:
Yes No

Inspections

Pre-use and routine inspections:
The checked items will be inspected following the manufacturer instructions and at intervals checked to confirm set up is correct.

Rescue

Rescue types:
The following rescue techniques will be used in a hierarchy approach with self rescue being the first choice.
Fall Restraint rescue:

In a in a total fall restraint system you cannot fall therefore rescue will not require work at heights. Follow standard injury/ first aid procedures. Before finishing, consider if there is any potential for you to be suspended by your fall protection system - if there is, then you will need rescue planning.

Administrative controls - rescue:

Administrative controls do not allow a worker to get within 6.5' of a fall hazard. Rescue will be standard injury/ first aid procedures.

Before finishing, consider if there is any potential for a rescuer to need to use rope rescue or DOP rescue to get you to the ambulance (consider ladders and less accessible areas) - if there is, then you will need rescue planning.

Rescue types:
By choosing a scenario, the step by step instructions will be added to this plan.
Choose as many as needed.
They are listed in a hierarchy or difficulty.
We will use Worker self rescue first:
No selection made
Available options:
Yes No
We will use Worker assisted rescue when self rescue cannot be used:
No selection made
Available options:
Yes No
We will use DEP box rescue - only choose if a DEP box and crane is on site - when self or assisted rescue are not possible:
No selection made
Available options:
Yes No
We will use MEWP (scissor or boom) rescue when one is available and worker is conscious:
No selection made
Available options:
Yes No
We will use a rope rescue system - only choose if there is a system available:
No selection made
Available options:
Yes No
Notice - WSBC and emergency services:
NOTE 1– prior to considering emergency services your only rescue provider an assessment following requirements in WSBC Guidelines 14.3(1) must be completed and emergency services notified.
Note 2 - When doing short duration suspended work you should also consider the “Notice of Rescue Service for Short-term Work” found in section 4.13 of the WSBC guidelines - https://www.worksafebc.com/en/law-policy/occupational-health-safety/searchable-ohs-regulation/ohs-guidelines/guidelines-part-04#SectionNumber:G4.13_1

Notes from any section

Add any additional notes in this area:
N/A

Workers sign off

Signatures:
Supervisor signs to confirm it has been reviewed by workers - attach an additional sign off sheet if needed
Signature:
N/A
Edit this Form

Complete & File Form

Choose which binder to save this form record in.

Once completed, this form cannot be edited.